Steel PDc Bit With High Perfermance For Well Drilling

Product description

1. The Steel PDc bitis a one-piece bit, and the bit parts should not fall off during driling, soit can be used at hicher speed and can withstandgreater lateral load without downhole accidents.

2. Steel Body PDc bit mainly relies on the cutting action ofthe PDc composite piece to break the rock, with low torgue and good stability duringdrilling, and high mechanical drilling speed under smaller driling pressure and high rotational speed.

3. Steel PDc bits are wear-resistant and long-lasting when used correctly, and are suitable for deep wells and abrasive formations.

Features

1. The upper part of the Matrix PDc Bit is made of steel and the lower part is made of tungsten carbide wear-resistant alloy. The PDc cuttingteeth are welded to the pre-set grooves ofthe body with low temperature welding materia. The tungsten carbide body has high hardness and isresistant to erosion, so the Matrix PDC bit has long life and high feed rate, and is widely used.

2. The Matrix PDc bit is mainly used for dificult to dril formations with high gravel and compressive strength.its own strength is higher thanthat of steel body bits.

3. Matrix PDc bits have high hardness and wear resistance of cutting teeth due to the use of polycrystaline diamond composite as cuttingelement.

Product Model